Continue Our 40 Hrs of Learning

Hi Colleauge, Today we just finished part of the 40 hours clocking. What we learned for the past 3 days are very technical stuff which some of us have no experience at all. But nevermind, we have to continue our learning process and to better understand the past 3 days lesson, I purposely created this blog to exchange our experience and secret weapons learnt from those 3 days. This can also act as part of revision, those stuff that we went through have to keep it somewhere and practice it. I hope that these blog can encourage all of us to exchange what we learnt during our 40 hours.

---

Table of Contents

---

Enterprise Network Design and Implementation

Chapter	Course Outline	Day
1	TCP/IP Concepts Introduction to TCP/IP protocol IP Header IP Addressing and Subnetting IP Address Allocation Exercisese: Fixed and Variable Length Subnetting(Ex 1) Hyperterminal Setup and Cisco Router Access (Lab1) Introduction to CISCO Router Command Line Interface (Lab2)	One
2	Routing Protocol Objective of Routing Types of routing protocols Static and dynamic routing Distance-Vector vs Link-State Link-State routing protocol Static route implementation Implementation of RIP-based routing(Lab4) Implementation of IGRP routing(Lab5) Configuration OSPF routing process (Lab6)	Two
3	Enhancement to IP Services Dynamic Host Configuration Protocol (DHCP) DHCP across various segments Private addresses and Network Address Translation(NAT) Implementation of Router-based DHCP Service(Lab7) NAT Implementations(lab8)	Three